QuickBayt 10% Imidacloprid Spot Spray – Residual Fly Control for Up to 6 Weeks

QuickBayt® Spot Spray — Ready-to-Mix Fly Bait Spray

QuickBayt Spot Spray is a bait-in-a-bottle fly control that combines a fast-acting active ingredient with powerful attractants for long-lasting control in and around animal facilities. Each formulation contains 10% imidacloprid and two proprietary attractants (including muscalure) to lure and kill house flies — often in as little as 60 seconds. The concentrate mixes with water to create a sprayable “bait station” that adheres to walls, beams, posts, and other fly-resting surfaces where granular baits can’t reach.

QuickBayt Spot Spray delivers the convenience of a bait-in-a-bottle with the reach of a spray—fast knockdown plus long residual control for facilities where flies are a persistent problem.

Benefits:

• Kills flies quickly — often within 60 seconds of contact
• Long residual control: up to 6 weeks indoors / protected areas, up to 2 weeks outdoors
• Two potent attractants (muscalure + flavor) increase uptake
• Includes Bitrex (bittering agent) to reduce accidental ingestion by non-target animals
• Ready-to-mix concentrate for spot, brush/paint, or coarse-spray applications
• Dries nearly clear and can be applied to hard-to-reach resting places

Best For:

• Feed lots, dairy barns, swine buildings
• Horse stables and poultry houses
• Dog kennels, veterinary clinics, and animal facilities
• Walls, ceilings, pillars, fence posts, runways, and other fly-resting surfaces

Product Forms & What’s in the Bottle:

• 3 oz concentrate in 24 oz capacity spray bottle (mix & use as directed)
• Active ingredient: 10% Imidacloprid
• Contains attractants, Bitrex (bittering agent), and formulation carriers

Mixing & Coverage:

• Trigger/3 oz spray bottle: Fill bottle with water to the indicated fill line and spray on fly-resting surfaces. This package will treat approximately 188 sq ft of fly-resting surfaces (spot application: 3–12 sq ft per treated spot).
• 1 gallon mix (bulk application): Mix concentrate with 1 gallon of water to treat up to 1,000 sq ft of fly-resting surfaces (apply as coarse spray or paint-on bands).
• Use diluted mix within 24 hours of mixing.

Application Methods:

• Spot spray: Apply as coarse spray to spots where flies rest (3–12 sq ft spots). For a building with 1,000 sq ft floor area, you may apply up to 50 spots of 10 sq ft each without exceeding the recommended limit (do not exceed 8 oz product per 1,000 sq ft).
• Paint-on: Use a brush or roller to apply small bands (up to 6 wide) on surfaces where flies aggregate.
• Coarse spray (low pressure ≤ 20 psi): Apply to structural surfaces (walls, rafters, posts). Flush spray equipment with water after use to prevent clogging.
• Reapplication: Reapply only as needed, and not before 7 days after initial application.

Performance Expectations:

• Provides residual control up to 6 weeks indoors/protected areas and up to 2 weeks outdoors, depending on environmental conditions and exposure.
• For heavily soiled or high-pressure fly areas, a higher localized concentration or more frequent applications may be used as directed on the label.

Safety & Cautions:

• FOR PREMISE USE ONLY — not for direct application to animals.
• Contains a bittering agent (Bitrex) to discourage accidental ingestion, but keep product away from animals and children.
• Harmful if swallowed. Causes eye irritation. Avoid contact with skin, eyes, and clothing.
• Wear appropriate protective equipment (gloves, eye protection) when mixing and applying.
• Do not apply ammonia or vinegar prior to using QuickBayt — these will reduce product effectiveness.
• Store containers upright and secure; mix solutions only as directed and use within 24 hours.

Important Use Notes:

• Mix and apply only according to label directions and local regulations.
• For best results, treat multiple locations throughout the facility where flies rest.
• Do not exceed labeled application rates (example: do not exceed 8 oz product per 1,000 sq ft).